B12A6D - Advanced Motion B12A6D Servo Amplifier. 12 A Peak Current |...
Request Quote
For Price
- Part Number:
- B12A6D
- Model Number:
- B12A6D
- Make:
- ADVANCED MOTION
- Lead Time:
- Available
- Qty In Stock:
- Available
Advanced Motion B12A6D Servo Amplifier. 12 A Peak Current | 6 A Continuous Current | 20-60 VDC Supply Voltage | Analog Servo Drive Simple Type: Amplifier
The B12A6 PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against over-voltage, under voltage, over-current, over-heating and short-circuits across motor, ground and power leads. Furthermore, the drive can interface with digital controllers or be used stand-alone, and requires only a single unregulated DC power supply. Loop gain, current limit, input gain and offset can be adjusted using 14- turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Adjustable Current Limits
- Adjustable Input Gain
- Current Monitor Output
- Differential Input Command
- Digital Fault Output Monitor
- DIP Switch Selectable Modes
- Drive Status LED
- Four Quadrant Regenerative Operation
- High Switching Frequency
- Offset Adjustment Potentiometer
- On-Board Test Potentiometer
- Selectable 120/60 Hall Commutation Phasing
Specifications
- Agency Approvals: CE Class A (EMC), CE Class A (LVD), cUL, RoHS, UL
- Command Sources: ±10 V Analog
- Commutation Methods: Trapezoidal
- DC Bus Over Voltage Limit: 67VDC
- DC Supply Voltage Range: 20 - 60VDC
- Feedback Supported: Halls, Tachometer
- Form Factor: Stand Alone
- Hardware Protection: Invalid Commutation Feedback, Over Current, Over Temperature, Over Voltage, Short Circuit (Phase-Phase & Phase-Ground)
- Heatsink (Base) Temperature Range: °C (°F) 0 - 65 (32 - 149)
- Maximum Continuous Output Current: 6A
- Maximum Continuous Output Power at Continuous Curret: 342W
- Maximum Peak Output Current1: 12A
- Maximum Power Dissipation at Continuous Current: 18W
- Minimum Load Inductance (Line-To-Line)2: 200µH
- Modes of Operation: Current, Open Loop, Tachometer Velocity
- Motors Supported: Three Phase (Brushless), Single Phase (Brushed, Voice Coil, Inductive Load)
- P1 Connector: 16-pin, 2.54 mm spaced, friction lock header
- P2 Connector: 5-port, 5.08 mm spaced, screw terminal
- Size (H x W x D) mm (in): 129.3 x 75.8 x 25.1 (5.1 x 3 x 1)
- Storage Temperature Range: °C (°F) -40 - 85 (-40 - 185)
- Switching Frequency: 33kHz
- Weight g (oz): 280 (9.9)
Applications
- None Available
Aliases
- None Available